![]() ![]() The max cable distances are also different depending on the video standard that is used (AHD, HD-TVI, HD-CVI). The maximum distance that coax security camera video signals can be amplified can be effected by the quality of the cable, camera, DVR, BNC connectors, and installation. This allows RG59 or RG6 cable to be run up to 1500 meters / 5000 feet for AHD or HDCVI cameras and 1200 meters / 4000 feet for HD-TVI cameras. In the above installation, one amp is positioned at each end of the cable run. Multiple amplifiers can be used together to increase video transmission distance even further. ![]() Installers should test with the factory settings first. The gain frequency and brightness dials can be adjusted to clarify the picture as needed.It is also recommended to use the ground cable that is included.The PT-4 is connected to the 12V DC power supply that is also included. A PT-4 power lead is included and is connected to the +/- power terminals on the amplifier.RG59 or RG6 coaxial cable connects the video output of the amp to the DVR.The coax cable can be run up to 800 meters / 2600 feet for AHD and CVI cameras / 600 meters / 2000 feet for HD-TVI.It is not possible to run low voltage power at these distanced back to the location of the DVR. Please note that the camera must be powered locally where it is mounted. Be sure to use 75-ohm coax cable that is made for CCTV. The HD CCTV camera (AHD / HD-TVI / HDCVI) is connected to the video input of the amplifier using RG59 coax cable with BNC connectors.In this example, the video amplifier is installed on the DVR end of the cable run. Middle-Frequency Gain / High-Frequency Gain / Brightness Adjustments.Multiple Amplifiers can be used to extend distance further.Installations with 2 Amplifiers doubles the max distance.Amplifies Analog CCTV (CVBS) Video Transmission up to 2600 feet / 800 meters.Amplifies AHD Video Transmission up to 2600 feet / 800 meters.Amplifies HD-CVI Video Transmission up to 2600 feet / 800 meters.Amplifies HD-TVI Video Transmission up to 2000 feet / 600 meters.CIF, D1, 960H Resolution supported for analog CCTV cameras (CVBS).720p, 1080p / 2mp, 3mp, 4mp, 5mp, and 8mp / 4K security camera support.Compatible with analog CCTV cameras (CVBS).Compatible with HD-TVI, AHD, and HD-CVI Cameras.CCTV Camera Pros also supplies splitters/amplifiers for HD-SDI type cameras. This product does NOT work with HD-SDI security cameras. Up to 3 units can be powered from the same power adapter using the included power jumper cables. Please refer to the latest updated max cable distance chart here.Ī 12V-DC power supply is included. For example, one AMP-101HD can be installed on the camera side of the cable run and another on the DVR or monitor side to boost AHD and HD-CVI camera up to 1500 meters / 5000 feet and HD-TVI up to 1200 meters / 4000 feet. Multiple amps can be combined on a single cable run to extend the video transmission distance even further. This device works with D1, 960H, 720p, 1080p, 3mp, 4mp, 5mp, and 8mp / 8K resolution cameras. It is designed to be used with 75ohm RG6 or RG59 coax cable.ġ080p AHD and HD-CVI video transmission can be boosted up to 800 meters (2600 feet) and 1080p HD-TVI cameras can be boosted up to 600 meters (2000 feet) using one amplifier. This is a single channel amp that uses a BNC video input and output. The AMP-101HD is an HD CCTV camera video amplifier that works with the following camera types: AHD, HD-TVI, HD-CVI, and analog CCTV (CVBS). ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |